← Back to notes

LED circuit explorer

Choose a supply and an LED, then slide through the standard resistor values. The current, the LED's brightness and the flow of charge round the circuit update as you go. Pick a resistor that is too small and the LED burns out.

390 Ω
no resistor100 Ω1 kΩ10 kΩ

Use the slider or the arrow keys. Each step is the next standard value: 10, 12, 15, 18, 22, 27, 33, 39, 47, 56, 68, 82 Ω, then the same ×10, ×100 …

Current through the circuit

17.9 mA
020 mA rated30 mA max40+
Voltage across the resistor
Power in the resistor
Worst case if the resistor is 5 % low
Smallest safe standard value

The calculation

This uses the simple LED model from the notes: the LED drops a fixed forward voltage Vf once it conducts, and the resistor sets the current. With no resistor the only thing limiting the current is the supply's own internal resistance (taken here as 1.5 Ω), so the current is far beyond the LED's rating. Ratings assumed: 20 mA continuous, 30 mA absolute maximum (typical 5 mm LED).